Stop Carbide Drill Breakage in Its Tracks
Carbide drills are beloved for their high hardness, tolerance to high speeds and temperatures, and efficient cutting abilities. However, they can be brittle, and breaking a carbide drill is a quick way to completely cancel out what should be improved economy and lower operating costs as a result of longer tool life. A broken drill is no good and needs to be replaced.
Fortunately, there are things you can do to help prevent carbide drills from breaking. Check out some of these tips and see if any of them are actionable for you.
- Optimize coolant delivery. Efficient coolant delivery not only lowers thermal stresses and improves cutting efficiency, it helps reduce chip packing that can stress, and break, the cutting tool.
- Slow down feed rate. Feed rate is how fast you work the cutting tool into the workpiece, and if the feed rate is too high, it can hinder chip evacuation and cause significant thermal stresses that can cause tool breakage.
- Select tool coating wisely. There are many different types of carbide drill coatings, each of which offers its own unique advantages. Some reduce thermal and oxidative stresses, some improve permanent dry lubricity which in turn facilitates chip evacuation. Some offer a combination of these factors.
- Run the drill at optimal operating speeds. Higher speeds can improve operational workflow as well as cutting efficiency, but they can also induce higher thermal stresses and cause workpiece hardening that stresses the drill. Speeds that are too high or too low can also cause chatter which will ruin the finish on the workpiece and which can and often does stress and break the drill.
- Reduce runout. Runout occurs when the drill is offset to where it should be, which places an uneven load on one cutting edge. Not only will it damage the finish on the workpiece but it is immensely stressful on the cutting tool and can cause breakage.
Stop! Your Carbide Drill Is About to Break!
Now that you know a few things you can potentially do to prevent carbide drill breakage, let’s talk about the warning signs. Stop your operation and address the issue if you notice any of the following while running the machine:
- Weird machining noises.
- Chatter
- Poor chip evacuation that is visually noticeable.
- Smoke, or discoloration of the drill or workpiece that can indicate overheating.
- Drill wandering or skipping.
- A sudden spike in the spindle load which indicates high tool stress.
If you notice any of these, stop and address the issue. There is something that needs to be rectified otherwise you will stress if not break the drill, not to mention compromise the quality of the finished product even if the drill does not break.
Where to Get Replacement Carbide Drills
So you’ve broken a solid carbide drill. Now what? Visit Tennessee Machine Tools at TMT Toolbox. They carry a wide range of metal cutting tools including but not limited to solid carbide drills of all sorts, for an equally wide range of machining applications from boring to spotting and profiling. Visit their website and get in touch with them if you have any questions.
For More Information About Machine Tool Accessories and End Mills Please Visit: TMT Toolbox.
- Art
- Causes
- Crafts
- Dance
- Drinks
- Film
- Fitness
- Food
- Jogos
- Gardening
- Health
- Início
- Literature
- Music
- Networking
- Outro
- Party
- Religion
- Shopping
- Sports
- Theater
- Wellness